190-01115-01 G3X/G3X Touch Installation Manual - GDU 37X Config and Post Install Checkout
Rev. AC
Page 33-87
Stall Warning AOA Calibration
This procedure sets the AOA value for the top of the red "chevron" section of the AOA gauge
(Figure 33-28), which is also the AOA value at which the audible stall warning sound will play
continuously (just before stall break is suggested).
Figure 33-28 Stall Warning AOA
1.
Use the FMS Joystick to select the Calibrated Stall Warning AOA calibration field, then press the
Calibrate softkey.
2. Follow the onscreen instructions, then press the Start softkey to begin the calibration.
3. Press the Calibrate softkey when in compliance with the onscreen instructions.
Stall Warning
AOA (Indicator
Flashes and Audio
Tone Sounds
Continuously)