190-01115-01
G3X/G3X Touch Install Manual - GDU 4XX Config and Post Install Checkout
Rev. AC
Page 34-13
3. Ensure that all the required status boxes are checked (
). Use the Touch
Panel or a Move Selector Knob to select which ADAHRS (1, 2 or 3) is being configured.
4. Use the Touch Panel or a Move Selector Knob to select Pitch/Roll Offset.
5. Ensure that aircraft and ADAHRS comply with all on-screen instructions, press the START
button.
NOTE
Per the following figure, GSU 25 units must have the ADAHRS pitch and roll within 30
degrees of level, GSU 73 units must have the ADAHRS pitch and roll within 3.0 degrees of
level.