190-01115-01
G3X/G3X Touch Install Manual - GDU 4XX Config and Post Install Checkout
Rev. AC
Page 34-116
34.4.18 Sound Configuration Page
The Sound Configuration Page allows setting the parameters for various alert and message tones. A TEST
softkey is used to test audio volume and configuration.
1. In configuration mode, use the Touch Panel or a Move Selector Knob to select the Sound
Configuration Page.
2. Use the Touch Panel or a Move Selector Knob to select the desired configurable item and make the
desired selection.
3. Enter data (where applicable) using the Keyboard (
) or Slider Bar (
).
4. Press the Back key to return to the Configuration Mode page when finished (if desired).
The configuration options for the Sound Configuration Page are listed/described as follows:
Alert Volume–
Controls the volume level (settings 0%-100%) of audio alerts (Altitude, CAS, Integrated
Autopilot, Terrain, Traffic)
Message Volume
–Controls the volume level (settings 1-10, or OFF) of message tones (Airspace Advisory
Messages, Approaching VNAV Target Altitude Message, etc.)
Terrain Audio
–Enables/disables terrain awareness audio alerts
Traffic Audio
–Enables/disables Traffic Audio alerts
Traffic N/A Alert
–Enables/disables Traffic Not Available alerts
AOA Alert
–Enables/disables AOA Alert tone
Altitude Alert
–Enables/disables the Altitude Alert tone
Minimums
Alert–Enables/disables the Altitude Minimums tone
