190-01115-01
G3X/G3X Touch Install Manual - GDU 4XX Config and Post Install Checkout
Rev. AC
Page 34-157
34.4.26.18 Carburetor Temperature
The following sensors can be configured to monitor carburetor temperature on the GEA 24 or GSU 73
MISC TEMP 1 inputs, or the GEA 24 MISC TEMP 2 input:
•
UMA 1B10R RTD (or any Pt100-type RTD sensor)
•
Rotax 965531
•
Rotax 966385
•
Thermistor (any VDO or similar 50-150°C thermistor
FADEC:
The GEA 24 can be configured to monitor coolant temperature data from the Rotax
912iS/915iS FADEC interface.
34.4.26.19 Manifold Air Temperature
FADEC:
The GEA 24 can be configured to monitor manifold air temperature data from the Rotax
912iS/915iS FADEC interface.
34.4.26.20 Turbine Inlet Temperature (TIT)
One or two Type K thermocouples can be connected for turbine inlet temperature monitoring, using the
TIT 1 and TIT 2 inputs on the GEA 24 or GSU 73. If Lean Assist using TIT is desired, change the Lean
Assist setting to "Enabled". (see
for more information).
For turbine engine applications, the TIT 1 or TIT 2 input can alternatively be configured to monitor a
single Turbine Interstate Temperature (ITT) or Turbine Outlet Temperature (TOT).