190-01115-01
G3X/G3X Touch Installation Manual - GDU 37X Installation
Rev. AC
Page 6-5
Figure 6-4 GDU 37X Panel Cutout Template
GDU 37X PANEL CUTOUT TEMPLATE
5.57 in
[141.4 mm]
7.33 in
[186.2 mm]
Cut out panel
to inside line
For corner holes, center punch and drill
(#36) / tap (6/32) to create threaded holes
OR
drill out with 25 drill bit and use Garmin
nut-plate P/N 115-01054-00
IMPORTANT!
Ensure the Page Scaling setting
is set to NONE when printing
this page. Verify dimensions
of printed template are
accurate before cutting panel.