190-01115-01
G3X/G3X Touch Install Manual - GDU 4XX Config and Post Install Checkout
Rev. AC
Page 34-105
34.4.12 Flaps Configuration Page
The Flaps Configuration Page contains two items as follows:
Full Flap Max Airspeed - Enter maximum airspeed for full flap deployment.
Partial Flap Max Airspeed - Enter maximum airspeed for partial flap deployment, entry must be greater
than the full flap maximum airspeed.
The airspeed values are only used in conjunction with the flap control, they appear only when the GAD 27
is present. These values do not affect airspeed display.
NOTE
Electrical Control System must be enabled on the LRU Configuration Page in order to
display the Flaps Configuration Page.
NOTE
There must be intermediate
configured (more than only 0 and Full) for the
partial flap maximum airspeed selection to be available.
NOTE
Automatic flap movement is not supported in configuration mode. Hold the flap switch for
1 second or longer to perform manual flap movement.
