56
G500/G600 Cockpit Reference Guide
190-00601-03 Rev H
AUX GROUP
A
UX GROUP:
SY
STEM SETUP P
A
GE
System Setup Page
Soft Keys Found on System Setup Page
Setting Brightness and Mode
1) While viewing the System Setup Page of the Aux Page Group, press the small
MFD
knob. The LEVEL in the DISPLAY BRIGHTNESS box will flash.
2) Turn the small
MFD
knob to brighten or dim the display.
3) Press
ENT
when you reach the desired level.
NOTE:
When LEVEL is changed, the MODE defaults to MANUAL. If
MODE is set the AUTO, the LEVEL will adjust in response to ambient
light or a lighting bus, as configured during installation.
Setting Airspeed References
1) While viewing the System Setup Page of the Aux Page Group, press the small
MFD
knob. Turn the large
MFD
knob to move to the desired field in the
AIRSPEEDS box.
2) Turn the small
MFD
knob to change the speeds and to also turn the speeds
ON or OFF. When the speeds are turned ON they are shown near the bottom
of the Airspeed Tape if airspeed is zero.
Airspeed References
V Speed References on Airspeed Tape
NOTE:
At any time during the setting of your airspeed references,
pressing the
DFLT SPD
soft key will restore the unit to its initial
configuration.
Summary of Contents for G500
Page 1: ...G500 G600 Cockpit Reference Guide...
Page 103: ......
