4-22
Garmin G500H Pilot’s Guide
190-01150-02 Rev. J
For
ewor
d
Sec 1 System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazar
d
Avoidance
Sec 5
Additional Featur
es
Sec 6
Annun. & Alerts
Sec 7
Symbols
Sec 8
Glossary
Appendix A
Appendix B
Index
4.6.1.1
Displaying and Operating Traffic (TAS Systems)
The Traffic Map Page shows surrounding TAS traffic data in relation to the
aircraft’s current position and altitude. Traffic page orientation is always heading
up. The traffic mode and altitude filter mode are annunciated in the upper left
corner.
Traffic Advisory,
Off Scale Aircraft
is Out of Range,
1200 ft Above and
Climbing
Operating
Mode
Traffic Advisory,
Aircraft is 5000
ft Above and
Descending
Range Ring
Diameter
Non-Threat
Traffic
Proximity Advisory,
1200 ft Above and
Climbing
Ownship
Symbol
Non-Bearing Traffic (System is Unable to
Determine Bearing), Aircraft Distance is
8.0 NM, 1100 ft Above and Descending
Figure 4-24 Traffic Map Page - TAS/TCAS
4.6.1.2
Switching from Standby Mode to Operating Modes
The unit must be in operating mode for traffic to be displayed.
1) While viewing the Traffic page of the MAP page group, select the
OPERATE
soft
key or press the
MENU
key and turn the small
MFD
knob
to select Operating
Mode.
2) To switch to Standby Mode from the Traffic Page, select the
STANDBY
soft
key.
3) Select the
ALT MODE
soft key to change the altitude volume.
4) Select the
STANDBY
soft key to place the system in the Standby mode.
STANDBY is displayed in the Traffic mode field.
Summary of Contents for G500H
Page 1: ...G500H Pilot s Guide ...
Page 365: ......
