2-27
190-01150-02 Rev. J
Garmin G500H Pilot’s Guide
For
ewor
d
Sec 1
System
Sec 2
PFD
Sec 3
MFD
Sec 4
Hazar
d
Avoidance
Sec 5
Additional
Featur
es
Sec 6
Annun.
& Alerts
Sec 7
Symbols
Sec 8
Glossary
Appendix A
Appendix B
Index
2.8.2
Temperature Display
The outside air temperature is displayed to the left of the HSI. The air data
computer calculates the temperature based on temperature probe and pitot/
static inputs. The units (°C or °F) and temperature reference are selected on the
AUX – SYSTEM SETUP page. The temperature reference can be selected to one
of the following choices:
• Static Air Temperature (SAT) – This is the calculated temperature of the
stationary (static) outside air. Conceptually, this is the temperature that
would be read on a thermometer floating stationary at the current location.
• Total Air Temperature (TAT) – This is the calculated temperature of the
outside air as it moves past the aircraft, including the rise in temperature
due to air compression and friction at the current airspeed.
• Difference from International Standard Atmosphere (ISA) – This is the
difference between SAT and standard (ISA) temperature at the current
altitude. This provides an indication of how much warmer/colder the
temperature is from a “standard” atmosphere.
Figure 2-34 HSI Outside Air Temperature
2.8.3 Wind Vectors
When selected, wind vector information is displayed in a window on the
PFD to the left of the HSI. The Wind Vector style is configured in the Aux Mode
System Setup page. When the airspeed is less than 20 knots, the Wind Vector
window will indicate “No Wind Data.”
Figure 2-35 Wind Vector with No Wind Data
Four styles are available as shown below.
Style 1
Style 2
Style 3
Style 4
Figure 2-36 Wind Vector Style
Summary of Contents for G500H
Page 1: ...G500H Pilot s Guide ...
Page 365: ......
