Garmin G950 Pilot’s Guide for the Pilatus PC-6
190-00870-02 Rev. A
236
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
DEPARTURES
A Departure Procedure (DP) is loaded at the departure airport in the flight plan. Only one departure can be
loaded at a time in a flight plan. If a departure is loaded when another departure is already in the active flight
plan, the new departure replaces the previous departure. The route is defined by selection of a departure, the
transition waypoints, and a runway.
LOADING A DEPARTURE INTO THE ACTIVE FLIGHT PLAN
Loading a departure into the active flight plan using the
PROC
Key:
1)
Press the
PROC
Key. The Procedures Window is displayed.
2)
Highlight ‘SELECT DEPARTURE’.
3)
Press the
ENT
Key. The Departure Loading Page is displayed.
4)
Select a departure from the list and press the
ENT
Key.
5)
Select a runway (if required) and press the
ENT
Key.
6)
Select a transition (if required) and press the
ENT
Key. ‘LOAD?’ is highlighted.
7)
Press the
ENT
Key to load the departure procedure.
Figure 5-96 Departure Selection
Departure Airport
Departure Preview
Available Procedure Actions
Departure Choices
Loaded Procedures
