background image

 

Page 4-6 

 

GMA 1347D Installation Manual 

Revision C 

 

190-00303-21 

 

4.3 

J3472 Connector Pin Assignments 

This section covers the pin connections of J3472 only. 
 

4.3.1  Aircraft Power and Lighting 

Power Input requirements and Lighting Bus inputs are listed in the following tables.  The power-input 
pins accept 11-33 Vdc.  AIRCRAFT POWER 2 is for connecting to an alternate power source, such as on 
aircraft with two electrical buses.  Refer to Figure B-1 for power and lighting interconnections. 

Table 4-3.  Aircraft Power Pin Assignments, J3472 

Pin Pin 

Name 

Description 

I/O 

53 

AIRCRAFT POWER 1 

Unit power 

In 

55 

AIRCRAFT POWER 1 

Unit power 

In 

30 

AIRCRAFT POWER 2 

Unit power 

In 

32 

AIRCRAFT POWER 2 

Unit power 

In 

69 

POWER GROUND 

Aircraft ground 

-- 

71 

POWER GROUND 

Aircraft ground 

-- 

14 

POWER GROUND 

Aircraft ground 

-- 

16 

POWER GROUND 

Aircraft ground 

-- 

27 

GMA REMOTE POWER OFF 

ARINC active high signal turns unit off 

In 

 
Pins 53 and 55 of J3472 are internally connected to form AIRCRAFT POWER 1.  Pins 30 and 32 of 
J3472 are internally connected to form AIRCRAFT POWER 2.  AIRCRAFT POWER 1 and AIRCRAFT 
POWER 2 are “diode ORed” to provide power redundancy. 

 

4.3.2 Lighting Bus 

The GMA 1347D can be configured to track a 28 Vdc or 14 Vdc lighting bus using these inputs. The 
GMA 1347D can also automatically adjust for ambient lighting conditions based on photocell input on 
the PFD/MFD by digital means. 

Table 4-4.  Aircraft Lighting Pin Assignments, J3472 

Pin Pin 

Name 

Description 

I/O 

51 

14 V LIGHTING HI 

14V Backlighting input, 0 to 14 Vdc 

In 

52 

28 V LIGHTING HI 

28V Backlighting input, 0 to 28 Vdc 

In 

 

Summary of Contents for GMA 1347D-00
















































Reviews: