Page 1-4
GMA 340 Installation Manual
Rev. L
190-00149-01
1.6
ADDITIONAL EQUIPMENT REQUIRED
•
Antenna sealant (use manufacturer’s instructions, install according to FAA AC 43.13-2A).
•
Cables: The installer will fabricate and supply all system cables. Interconnect wiring diagrams
are detailed in Appendix B.
•
Hardware: #6-32 100
°
flat head screw (6 ea.) and #6-32 self-locking nut (6 ea.). Hardware
required to mount the installation rack is not provided.
•
Stereo headphone jacks (up to 6), microphone jacks (up to 6), 3.5mm stereo jacks (up to 2), and
insulating washers for all.