GMA 340 Installation Manual
Page A-1
190-00149-01
Rev. L
APPENDIX A
CERTIFICATION DOCUMENTS
A.1
CONTINUED AIRWORTHINESS
This section provides assistance to the installing agency in preparing Instructions for Continued Airworthiness
(ICA) in response to Bulletin Number HBAW 98-18, “Checklist for Instructions for Continued Airworthiness for
Major Alterations Approved Under the Field Approval Process”, effective 10/7/98.
Aviation Authority approved installers are hereby granted permission to reference appropriate service instructions
and excerpts from this Installation Manual to accomplish the Instructions for Continued Airworthiness. This
permission does not construe suitability of the documents. It is the applicant’s responsibility to determine the
suitability of the documents for the ICA.
Following is suggested ICA for a Garmin GMA 340 Audio Panel installation. Some of the checklist items do not
apply, in which case they should be marked “N/A” (Not Applicable). In this sample, square braces are used to
indicate instances where explicit words should be substituted.
INSTRUCTIONS FOR CONTINUED AIRWORTHINESS, GARMIN GMA 340 AUDIO PANEL
1.
Introduction
[Aircraft that has been altered: Registration (N-) number, Make, Model and Serial Number]
Content, Scope,
Purpose and Arrangement: This document identifies the Instructions for Continued Airworthiness for the
modification of the above aircraft by installation of a Garmin GMA 340 Audio
Panel.
Applicability:
Applies to aircraft altered by installation of the Garmin GMA 340 Audio Panel.
Definitions/Abbreviations: None, N/A.
Precautions:
None, N/A.
Units of Measurement:
None, N/A.
Referenced Publications:
Garmin GMA 340 Audio Panel Installation Manual,
P/N 190-00149-01
Garmin GMA 340 Audio Panel Maintenance Manual,
P/N 190-00149-02
Garmin GMA 340 Audio Panel Pilot’s Guide,
P/N 190-00149-00.
Garmin GMA 340 STC #SA00710WI
Distribution:
This document should be a permanent aircraft record.
2.
Description of the Alteration
Installation of the Garmin GMA 340 Audio Panel, with interface to external transceivers and [include other
equipment/systems as appropriate]. Refer to section 2 and interconnect wiring diagrams figures B3 through
B6 of this manual for interconnect information. Antenna installation, removal and replacement should be in
accordance with applicable provisions of AC43.13-1B and 43.13-2A.
3. Control, Operation Information
Refer to the GMA 340 Audio Panel Pilot’s Guide.