Page 1-2
GMA 340 Installation Manual
Rev. L
190-00149-01
•
Independent pilot, copilot, and passenger volume controls
•
Individual VOX circuits for each of six (6) mic inputs
•
Automatic selection of radio audio source when corresponding mic is selected
•
MASQ
TM
Processing
•
Split COM transceiver function. Copilot may transmit and receive on COM2 while pilot
transmits and receives on COM1
•
COM swap function
•
TX indication
•
SmartMute
TM
marker audio muting
•
Speaker output for radios or PA function
•
Power-off fail-safe to connect Pilot PTT, mic, and Headset to COM 1 if unit is turned off
•
Power loss fail-safe warning audio
1.3
SPECIFICATIONS
SPECIFICATION
CHARACTERISTIC
TSO Compliance
TSO-C50c, C35d, JTSO-C50c, and JTSO-2C35d using DO-160C,
DO-170, and DO-143
Temperature Range
-20
°
C to +55
°
C
Weight
(Unit Only) 1.2 lbs. (0.6 kg)
(Installed with rack and connectors) 1.7 lbs. (0.8 kg)
Physical Dimensions:
Bezel Height: 1.30 inches (33 mm)
Bezel Width: 6.29 inches (160 mm)
Rack Height (Dimple to Dimple): 1.33 inches (34 mm)
Rack Width: 6.30 inches (160 mm)
Depth Behind Panel with
Connectors (measured from
face of aircraft panel to rear
of connector backshells)
7.12 inches (181 mm)
Power Requirements
Supply Voltage: 11.0 to 33.0 VDC; Operating Current: 2.2 A (normal
operation, 13.8 V, speaker on)
Altitude
50,000 Feet
Audio Panel
Transceiver inputs: 3
Receiver inputs: 5 (6 in Dual ADF version)
Unswitched inputs: 2
Input impedance: 500
ȍ
(800
ȍ
DME input in Dual ADF)
Input isolation: 60 dB minimum
Special functions: Fail-safe operation
MASQ
TM
processing