190-01878-05 Rev. A
Garmin GMA 345 3-COM Pilot’s Guide
28
GMA 345 3-COM Audio Panel
P
airing
To
a
g
arMin
virB X
or
virB Xe a
cTion
c
aMera
NOTE:
The GMA 345 3-COM is capable of connecting to one Bluetooth
device at a time.
The GMA 345 3-COM supports Bluetooth wireless delivery of pilot
headphone audio to versions of the Garmin VIRB action camera that
support Bluetooth mic audio input for recording.
Pairing a Garmin VIRB to the GMA 345 3-COM works like pairing
other Bluetooth audio devices. Once connected, pilot headphone
audio will be delivered to the VIRB via Bluetooth. In a connection
to the Garmin VIRB, the GMA is the source. Therefore, selecting an
entertainment key is not required.
P
airing
T
o
a T
hird
-P
arTy
c
aMera
NOTE:
The third party camera must support receiving audio via the
Bluetooth Hands-Free Profile.
NOTE:
The third party camera must initiate the initial pairing process
with the GMA 345 3-COM.
Press and hold the
TEL (PAIR)
Key for one second to put the
GMA 345 3-COM into pairing mode. Reference the third party
camera’s manual for its pairing instructions. Once the pairing process
is complete the GMA 345 3-COM and the third party camera will
connect to each other via the Hands Free Profile. During this initial
connection, Bluetooth Recording Mode will need to be enabled on
the GMA 345 3-COM for the third party camera. To enable Bluetooth
Recording Mode momentarily press the
TEL (PAIR)
and
PILOT
keys simultaneously. When this feature is enabled, the “Bluetooth
Recording Mode Enabled” message is played on the intercom.
Enabling Bluetooth Recording Mode only needs to be done once.
When the GMA 345 3-COM and the third party camera connect
again in the future Bluetooth Recording Modes will automatically be
enabled.
Summary of Contents for GMA 345 3-COM
Page 1: ...GMA 345 3 COM pilot s guide...
Page 33: ......
