190-01134-11
GMA 350/350c/350H/350Hc Installation Manual
Rev. J
Page 2-6
2.6 Mounting Requirements
The GMA 350/350H mounting surface must be capable of providing structural support and electrical bond
to the aircraft to minimize radiated EMI and provide protection from High-Intensity Radiation Fields
(HIRF).
The GMA 350/350H is mounted using its own unit rack (Figure 2-2). Refer to Appendix B for installation
drawings. The installer must provide any additional remote mounting equipment.
NOTE
To ensure a sturdy mount, rear support is highly recommended.
Figure 2-2. GMA 350/350H Unit Rack