Page 8-6
G300 Installation Manual – Software, Configuration, Databases, and XM Activation
Revision A
190-00921-01
8.4
Configuration Procedure
All unit configuration is performed on the FILE page in configuration mode.
In configuration mode, use the FMS Joystick to select the FILE Page.
1.
Use the FMS Joystick to select Airframe (if not already selected), and press the ENT Key.
2.
Use the FMS Joystick to select Cessna 162 Baseline Configuration (if not already selected),
and press the ENT Key.
3.
Use the FMS Joystick to select Yes (if not already selected) to load the C162 Baseline
Configuration, and press the ENT Key.
4.
Ensure that a green checkmark appears beside the configuration description to indicate a
successful load.
