7
190-00607-02 Rev C
Detailed Operation
noise Monitor
The Noise Monitor feature is a function of the
WX500. For details about using this feature refer to
the WX500 owner’s documents.
The Noise Monitor displays reports of electrical
noise, whether they are from lightning or other noise
sources within the range of the system. This function
is used to help determine if electrical noise is present
that may affect normal system operation.
Strike test
The Strike Test feature is a function of the WX500.
For details about using this feature refer to the WX500
owner’s documents.
The Strike Test feature is used by installers to verify
proper operation of the WX500. Test strikes are sent
to the antenna. The received test strike is then visually
presented on the screen.
Antenna change Message
When an “Antenna Change” message is shown, the
lightning sensor may have failed. When this message
is displayed, the sensor is automatically shut down for
the remainder of the flight. The installation should be
inspected before the lightning function is used again.
Lightning