To delete a waypoint:
1. Rotate
O
to highlight the waypoint you wish to delete.
2. Press
\
to remove the name, then press
E
to delete.
3. Repeat steps 1 and 2 to delete additional waypoints, or press
C
to finish.
To delete an entire route:
1. Use
K
to display the route number you would like to delete (route 0 for the active route).
2. Press
C
twice and use
O
to highlight the action field.
3. Use
K
to select ‘delete?’. Press
E
to delete.
Once a route is defined through the route catalog page, it may be activated from
the route catalog page. Activating or reversing a route places the selected route into
route 0 and overwrites the existing active route.
To activate a route:
1. Press
R
and use
O
to display the route catalog page.
2. Rotate
K
to display the route you would like to activate.
3. Press
C
twice and use
K
to display ‘activate?’. Press
E
.
After travelling a route or creating a route with the GNC 250’s AutoStore feature,
the route activation field may be used to activate the route in reverse order.
To activate a route in reverse order:
1. Press
R
and use
O
to display the route catalog page.
2. Use
K
to display the route number you would like to reverse.
3. Press
C
twice and use
K
to display ‘reverse?’. Press
E
.
63
APPENDIX A
Runway Length &
Display Timeout
Deleting route 0.
Reversing route 0.
SECTION
5
ROUTES
Deleting &
Activating Routes
250 real 7/14/98 9:32 AM Page 63
