The leg field can be selected to display cumulative distance or the distance for each
route leg. If cumulative is selected, the first leg’s distance will be displayed. The second
leg will represent the first leg’s distance plus the second leg, and so on. The time field
may be configured to display the estimated time enroute (ete), estimated time of arrival
(eta) or desired track (dtk) for each leg.
To change the leg and time fields:
1. With the flashing cursor active, rotate
O
to highlight the field you want to change.
2. Rotate
K
to select the desired setting and press
C
.
The active route page may also be used to create a new route or edit the route you
are currently navigating, and provides a fast method of selecting any route waypoint as
your next destination waypoint without modifying the active route. If you are editing
the active route and want to save it in its original form, copy it to an open storage route
before editing.
To add waypoints to the active route:
1. Press
C
twice, if necessary, to activate the cursor.
2. Use
O
to highlight the first blank waypoint field,
or
highlight the waypoint before which
you would like to add the new waypoint.
3. Use
K
and
O
to enter the new waypoint identifier. Press
E
.
4. Press
E
to accept or
\
to cancel. The cursor will automatically move to the next
waypoint field, and the remaining route waypoints (if any are present) will move down the
list accordingly.
68
APPENDIX A
Data Transfer
Active route page with cumulative distance and
desired track displayed.
Adding KEMP waypoint to the active route.
Active route page with leg distance and estimated
time enroute displayed.
SECTION
5
ROUTES
Active Route Page
Inserting Waypoints
250 real 7/14/98 9:33 AM Page 68
