GNC 420(A) Pilot’s Guide and Reference
8-12
SECTION 8
NRST PAGES
3) Turn the large
right
knob to scroll through the
list, highlighting the desired airspace (Figure
8-31).
Figure 8-31 Airspace Highlighted
4) Press the
ENT
Key to display the Airspace
Page for the selected nearby airspace (Figure
8-32).
Figure 8-32 Airspace Page
Status and
Time to Entry
‘Done?’ Field
(Return to
Previous Page)
Airspace Name
and Type
Floor/Ceiling
Limits
5) To return to the Nearest Airspace Page, verify
that ‘Done?’ is highlighted by the flashing
cursor and press the
ENT
Key.
6) Press the small
right
knob to remove the
flashing cursor.
Viewing and quickly tuning the frequency
for a controlling agency:
1) Follow steps 1 through 4 on the preceding page
to display the Airspace Page (Figure 8-32) for
the desired controlled or special use airspace.
2) Turn the large
right
knob to highlight
‘Frequencies?’ and press the
ENT
Key.
3) Turn the large
right
knob to scroll through the
list, highlighting the desired frequency (Figure
8-33).
Figure 8-33 Frequency Highlighted
4) Press the
ENT
Key to place the selected
frequency in the standby field of the COM
Window.
5) Press the
COM Flip-flop
Key to activate the
selected frequency (Figure 8-34).
Figure 8-34 Frequency Moved to Active Field
190-00140-20 Rev. K
Summary of Contents for GNC 420
