GNS 430 Pilot’s Guide and Reference
7-16
SECTION 7
WPT PAGES
To select a VOR frequency from the VOR
Page:
1) Select the VOR Page from the WPT Page Group,
as described in Section 7.1.
2) Press the small
right
knob momentarily to
place the cursor on the VOR identifier field
(Figure 7-34). To select another VOR, use the
small and large
right
knobs and press the
ENT
Key when finished.
Figure 7-34 VOR Identifier Field Selected
3) Turn the large
right
knob to highlight the
frequency field (Figure 7-35) and press the
ENT
Key to place the frequency in the standby field
of the VLOC Window.
Figure 7-35 Frequency Field Highlighted
4) To activate the standby VLOC frequency, press
the
VLOC Flip-flop
Key (Figure 7-36).
Figure 7-36 Activate the Standby Frequency
Summary of Contents for GNS 430
