GNS 430 Pilot’s Guide and Reference
2-4
SECTION 2
COM
To select a COM frequency for a nearby
flight service station (FSS) or center
(ARTCC):
1) Turn the large
right
knob to select the NRST
Page Group.
2) Turn the small
right
knob to select the Nearest
Center or Nearest Flight Service Page (Figure
2-7).
Figure 2-7 Nearest ARTCC Page
3) Press the small
right
knob momentarily to
place the cursor on the page.
4) Turn the large
right
knob to highlight the
FSS/ARTCC frequency.
5) Press the
ENT
Key to place the frequency in
the standby field of the COM Window.
To select a COM frequency for any airport
in the flight plan:
1) Select the NAV/COM Page from the NAV Page
Group. (Section 3.1, or press and hold the
CLR
Key, then turn the small
right
knob until the
NAV/COM Page appears.)
2) Press the small
right
knob to place the cursor
on the airport identifier field. To the left of this
field appears Departure, Enroute, or Arrival,
depending on the placement of the displayed
airport within the flight plan.
3) Turn the small
right
knob to display a window
(Figure 2-8) listing the airports in the flight
plan. Continue turning the small
right
knob
to select the desired airport.
Figure 2-8 NAV/COM Page ‘Airport’ Window
4) Press the
ENT
Key to return to the NAV/COM
Page with the frequencies for the selected
airport.
5) Turn the large
right
knob to highlight the
desired frequency.
6) Press the
ENT
Key to place the highlighted
frequency in the standby COM Window field.
Summary of Contents for GNS 430
