GNS 530(A) Pilot’s Guide and Reference
190-00181-00 Rev. G
SECTION 6
PROCEDURES
6-19
Figure 6-44 Procedures Page
3)
ATC instructs the pilot to turn left to a heading
of 025°. This places the aircraft parallel to the
final approach course in the opposite direction.
CDI needle deflection is to the left.
4)
ATC instructs the pilot to turn right to a heading
of 115°.
5)
ATC instructs the pilot to turn right to a heading
of 175° to intercept the final approach course.
When converging with the final approach course
the needle moves toward the center. (In Figure
6-45, the needle has not yet returned to the
on-screen CDI, since the current position is still
1.7 nm right of the final approach course.)
Figure 6-45 CDI Moves Toward Center
DO NOT USE FOR
NAVIGATION
’
‘
“
”
•
Figure 6-46 Approach Mode
,iviÀÊÌÊ}ÕÀiÊÈ{ÈÊvÀÊÌ iÊvÜ}ÊÃÌi«Ã°
6)
At 2.0 nm from the FAF (TOP VOR), the GNS
530 switches from terminal mode to approach
mode (Figure 6-47). CDI scaling is tightened
from 1.0 to 0.3 nm, full scale deflection.
Figure 6-47 Approach Mode
7)
When approaching the FAF, a waypoint alert
(‘NEXT DTK 214°’) appears in the lower right
corner.
Summary of Contents for GNS 530
