Garmin GNS 530 Pilot'S Manual & Reference Download

Page: 63 / 288

GNS 530(A) Pilot’s Guide and Reference

190-00181-00 Rev. H

4-3

SECTION 4

DIRECT-TO NAVIGATION

Selecting a Destination from the Active Flight
Plan

When navigating an active flight plan, any waypoint

contained in the flight plan may be selected as a direct-to

destination from the Select Direct-to Waypoint Page. See

Section 5, for more information on flight plans.

Selecting a direct-to destination from the
active flight plan:

1) Press the

Direct-to

Key. The Select Direct-to

Waypoint Page appears, with the waypoint
identifier field highlighted.

2) Turn the large

right

knob to highlight the flight

plan (FPL) field (Figure 4-7).

Figure 4-7 Highlighted Flight Plan Field

3) Turn the small

right

knob to display a window

showing all waypoints in the active flight plan
(Figure 4-8).

Figure 4-8 FPL (Flight Plan) Window

4) Continue turning the small

right

knob to

scroll through the list and highlight the desired
waypoint.

5) Press the

ENT

Key to confirm the selected

waypoint, and press the

ENT

Key again to

activate the direct-to function.

Summary of Contents for GNS 530

































































































































































































































































































Search results

Summary of Contents for GNS 530

Reviews:

Related manuals for GNS 530

Brands by name

Popular brands

Garmin GNS 530, Pilot'S Manual & Reference

Search results

Summary of Contents for GNS 530

Reviews:

Related manuals for GNS 530

Brands by name

Popular brands