Page 5-20
500W Series Installation Manual
Rev. D
190-00357-02
5.3.18 TRAFFIC
Page
NOTE
The following pages are only available if one of the RS-232 inputs is configured for the
Ryan TCAD or one of the ARINC 429 inputs is configured for Traffic Advisory.
Select the TRAFFIC page (see Figure 5-22). This page
shows the
L3
Communications SkyWatch or Ryan TCAD
modes of operation and current traffic situation.
For L3 Communications SkyWatch, this page shows:
1.
The altitude mode—below (BLW), normal
(NORM), above (ABV), or unrestricted (UNR)
2.
The operating mode—standby (STBY) or
operating (OPER)
3.
Current altitude (ALT)
4.
Altitude limits being imposed (LIM A and LIM
B)
5.
Heading, and barometric (BARO) and radio
(RAD) altitude status.
For L3 Communications SkyWatch (see Figure 5-22), verify that the 500W Series unit can change the
SkyWatch operating mode (STBY or OPER). In standby mode, verify that the SkyWatch may be placed
in self-test mode by highlighting “Test Mode?” and pressing ENTER on the 500W Series unit. Refer to
the L3 Communications SkyWatch installation manual for system checkout.
For Ryan TCAD (see Figure 5-23), this page shows the
current shield mode and altitude. Verify that the TCAD
shield mode may be changed—Ground (GND), Terminal
(TML), Standard (STD), En Route (ENR), or
Unrestricted (UNR), and that the TCAD is reporting the
correct altitude. Refer to the Ryan TCAD installation
manual for system checkout.
5.3.19 RYAN TCAD CONFIG Page
Select the RYAN TCAD CONFIG page (see Figure
5-24). This page shows the TCAD’s current shield
settings for the selected mode, approach mode status,
volume, mute status, mute duration, voice alert selection,
and system status.
Verify that the TCAD system status is GREEN. Also,
verify that shield settings and volume, mute duration, and
voice alert selection can be modified. Verify that
changes in mute (if a mute switch is installed) are shown.
Refer to the Ryan TCAD installation manual for system
checkout.
Figure 5-22. TRAFFIC Page
(SkyWatch)
Figure 5-23. TRAFFIC Page (TCAD)
Figure 5-24. RYAN TCAD CONFIG Page
Summary of Contents for GNS 530W
