190-00516-00
GPS 10 Technical Specifications
Rev. B
Page 20
Satellite Data Record
The satellite data has a record ID of 0x72 with 84 (0x54) data bytes. The data bytes contain the data for the
12 channels as described below. For each satellite, the following data is available:
typedef
struct
{
uint8
svid;
//space vehicle identification (1-32 and 33-64 for WAAS)
uint16 snr;
//signal-to-noise
ratio
uint8
elev;
//satellite elevation in degrees
uint16
azmth;
//satellite azimuth in degrees
uint8
status;
//status bit-field
} cpo_sat_data;
The status bit field represents a set of booleans described below:
Bit
Meaning when bit is one (1)
0
The unit has ephemeris data for the specified satellite.
1
The unit has a differential correction for the specified satellite.
2
The unit is using this satellite in the solution.
This pattern is repeated for all 12 channels for a total of 12 X 7 bytes = 84 (0x54) bytes :
typedef
struct
{
cpo_sat_data
cpo_sat_data
cpo_sat_data
cpo_sat_data
cpo_sat_data
cpo_sat_data
cpo_sat_data
cpo_sat_data
cpo_sat_data
cpo_sat_data
cpo_sat_data
cpo_sat_data
} cpo_all_sat_data
The RS-232 Packet for the Satellite Record looks like:
- 0x10
(DLE is first byte)
- 0x72
(Record ID – single byte)
- 0x54
(Number of data bytes – single byte)
- cpo_all_sat_data
- 0x##
(2’s complement of the arithmetic sum of the bytes between the delimiters)
- 0x10
(DLE)
- 0x03
(ETX is last byte)
The USB Packet for the Satellite Record looks like:
- 0x72
(Record ID – single byte)
- 0x54
(Number of data bytes – single byte)
-
cpo_all_sat_data
Summary of Contents for GPS 10 Deluxe
Page 33: ......
