190-00516-00
GPS 10 Technical Specifications
Rev. B
Page 27
Get Configuration From GPS (F8):
Retrieves the current programming from the sensor. The
programming is then displayed in the Main Interface Window.
Send Configuration To GPS (F9):
Sends the changes you have made to the programming to the sensor.
Switch to NMEA Mode (F10):
Switches the unit to NMEA Mode. The sensor must be in NMEA Mode
when connected to this software.
Switch to Garmin Mode (F11):
Switches the unit to Garmin Mode.
Update Software (F12):
After you have downloaded a new software version for the sensor, you can update
the sensor with the new software. Select Update Software and then select the file using the Open dialog
box. You must locate both the *.rgn file and the updater.exe file.
Do not attempt to update the GPS 10 software unless Bluetooth reception conditions are optimal. Devices
such as microwave ovens and 802.11b/g wireless networking gear can interfere with the Bluetooth link,
and may cause the software update to fail.
Note that, failed software update attempts are generally recoverable. If a software attempt fails, identify the
source of interference and try again.
View Menu
The View Menu allows you to view the NMEA sentences transmitted by the sensor. You can also
customize how the program looks by showing and hiding the Toolbar and Status Bar.
Help Menu
The Help Menu displays the software version and copyright information.
Summary of Contents for GPS 10 Deluxe
Page 33: ......
