Route Definition Page
The bottom of the route definition page features
‘function’ fields which let you copy, clear, invert, or
activate the displayed route. Routes 1-19 are used as
storage routes, with route 0 always serving as the active
route you are navigating. If you want to save a route
that’s currently in route 0, be sure to copy it to another
open route or it will be overwritten by the next route
activation.
Routes can be copied, cleared, inverted, and acti-
vated through the route definition page.
To select the route definition page:
1. Highlight ‘ROUTES’ from the Menu Page, and press
F
.
The ‘route number’ field is displayed at the top of
the page, with a 16-character ‘user comment’ field to
the right. If no user comment is entered, the field dis-
plays the first and last waypoint in the route. The way-
point list on the left side of the page accepts up to 30
waypoints for each route, with fields for desired track
and distance between legs. The total route distance is
indicated below the waypoint list.
29
Routes enable you to store
and use groups of fre-
quently used waypoints
together.
REFERENCE
Route Definition
Page
Enter each waypoint in
the order you would like to
navigate the list. If you
enter a waypoint not
stored in memory, you’ll
need to define the position
on the waypoint definition
page.
Comment
Field
Desired
Track of Leg
Total
Distance
Route
Number
Copy Field
Function Prompts
Leg Distance
126/128 Manual (new) 6/15/98 9:51 AM Page 29
