29
Cancelling an active GOTO
Man Overboard Function
Activating a Direct GOTO
Selecting a GOTO Destination
The GPS 12CX provides four ways to navigate to a
destination: GOTO, MOB, TracBack, and Route naviga-
tion. The most basic method of selecting a destination is
the GOTO function, which lets you choose any stored
waypoint as the destination and quickly sets a direct
course from your present position.
To activate the GOTO function:
1. Press the
GOTO key.
2. Select the waypoint that you want to navigate to and
press
ENTER.
Once a GOTO waypoint has been activated, the Com-
pass Page or Highway Page will provide steering guid-
ance to the destination until either the GOTO is can-
celled or the unit has resumed navigating the active route.
To cancel an active GOTO:
1. Press the
GOTO key.
2. Highlight the “OPT” tab
3. Highlight ‘CANCEL GOTO?’, and press
ENTER.
Man Overboard Function
The GPS 12CX’s man overboard function (MOB) lets
you simultaneously mark and set a course to a position
for quick response to passing positions.
To activate the MOB mode:
1. Press
GOTO twice. The GOTO waypoint page will
appear with ‘MOB’ selected.
2. Press
ENTER to begin MOB navigation.
The GPS 12CX will now guide you to the MOB way-
point until the MOB GOTO is cancelled. If you want to
save the MOB waypoint, be sure to rename it because it
will be overwritten the next time a MOB is activated.
R E F E R E N C E
GOTO
&
MOB
