background image

i

INTRODUCTION

Foreword

Software Version 2.01 or above

© 1997 GARMIN Corporation

1200 East 151st Street, Olathe, Kansas 66062-3426, USA

GARMIN (Europe) LTD, Unit 5, The Quadrangle, Abbey Park Industrial Estate,
Romsey, S051 9AQ, UK

Web Site Address: www.garmin.com

All rights reserved. No part of this manual may be reproduced or transmitted in any
form or by any means, electronic or mechanical, including photocopying and record-
ing, for any purpose without the express written permission of GARMIN.

Information in this document is subject to change without notice. GARMIN reserves 
the right to change or improve their products and to make changes in the content of
this material without obligation to notify any person or organization of such changes
or improvements.

March 1997

190-00067-80 Rev. A

Printed in USA

GARMIN, GPS 150XL, Spell’N’Find, AutoLocate,
PhaseTrac12, and AutoStore are trademarks of
GARMIN and may only be used with permission.

NavData

®

is a registered trademark of 

Jeppesen, Inc.

All rights reserved.

150xl manual B  8/4/98 1:08 PM  Page i

Summary of Contents for GPS 150XL

















































































































Reviews: