background image

RAIM not available

The GPS 150XL is unable to cross-check its
position using RAIM. You may continue to
navigate using visual flight rules. Your position
should be verified every 15 minutes using
other navigation sources. If you have  selected
a CDI scale other than ‘Auto’, selecting a larger
CDI scale may remove the conditions causing
this message.

RAIM position warn

RAIM has detected position errors. If you have
selected a CDI scale other than ‘Auto’, selecting
a larger CDI scale may remove the conditions
causing this message.

RAM failed 

The GPS 150XL has detected a failure in its
internal memory. If the message persists, the
GPS 150XL is unusable and should be taken to
an authorized GARMIN service center. 

Rcvr needs service 

The GPS 150XL has detected a condition
requiring service in the receiver hardware. The
GPS 150XL  should be taken to an authorized
GARMIN service center.

Ready for navigation 

The GPS 150XL is ready for navigation.

Receiver failed 

The GPS 150XL has detected a failure in the
receiver hardware. If the message persists, the
GPS 150XL is unusable and should be taken to
an authorized GARMIN service center.

ROM failed 

The GPS 150XL has detected a failure in its
permanent memory. If this message occurs, the
unit is unusable and should be taken to an
authorized GARMIN service center.

Route is empty 

An attempt has been made to activate an
empty route.

Route is full 

An attempt has been made to add more than
31 waypoints to a route. The GPS 150XL will
not allow more than 31 waypoints per route.

Route wpt deleted 

One or more route waypoints were deleted
while receiving data from the optional PC
Interface Kit.

Route wpt locked 

At least one route waypoint is locked because
the waypoint has been removed from the
Jeppesen NavData®, the data card is missing,
or the data card has failed.

Route wpt moved 

One or more route waypoints were moved at
least 0.33 arc minutes due to a database
change.

RTCM input fail 

The DGPS data signal was being received but
has now been lost.  Check wiring.

Searching the sky 

The GPS 150XL is in the search-the-sky mode.
Allow the unit to complete data collection
before turning it off.

APPENDIX

D

MESSAGES &

ABBREVIATIONS

89

150xl manual B  8/4/98 1:10 PM  Page 89

Summary of Contents for GPS 150XL

















































































































Reviews: