190-02207-A2
GPS 175/GNX 375/GNC 355 Part 23 AML STC Maintenance Manual
Rev. 3
Page 3-5
3.4 Configuration Mode Overview
Configuration mode is used to configure the GPS 175/GNX 375/GNC 355 settings for each specific
installation. To access Configuration mode, hold down the inner knob and press the
Power/Home
button.
When the Configuration mode home page appears, as shown in Figure 3-4, release the knob.
The Configuration mode home page is the first page that is displayed in this mode. For detailed
information on configuring the GPS 175, refer to
GPS 175 Part 23 AML STC Installation Manual
(P/N 190-02207-A1). For detailed information on configuring the GNX 375, refer to
GNX 375 Part 23
AML STC Installation Manual
(P/N 190-02207-A4). For detailed information on configuring the
GNC 355, refer to
GNC 355 Part 23 AML STC Installation Manual
.
While in Configuration mode, different pages can be selected by touching the desired key on the display.
Some pages may require scrolling to view all of the information an keys. Scrolling pages are indicated by a
series of dots along the bottom of the page, and scrolling is done by touching the screen and dragging the
page in the desired direction.
Figure 3-4 Configuration Mode Home Page
3.4.1 Updates
The
Software Updates
page allows the user to update the GPS 175/GNX 375/GNC 355 software versions.
For more information on software updates and instructions, refer to Section 7.2.
3.4.2 System Information
The
System Information
page displays general and board specific information for the GPS 175/GNX 375/
GNC 355. This page is used when checking for software versions as described in Section 7.1.
