Garmin Mobile
™
for BlackBerry
®
set up and go!
➏
Mount Your BlackBerry Device
To charge your BlackBerry device while it is in the
mount, connect the adapter cable to the power
connector on your BlackBerry device, and connect
the other end of the adapter cable into the power
connector on the bottom of the phone mount.
Gently pull the slide bars away from the mount.
Slide your BlackBerry device into the mount.
Adjust the posts for the best fit.
Note:
Some BlackBerry devices will not charge
outside of a specific temperature range. If your
BlackBerry device does not charge, refer to the
BlackBerry device’s documentation for more
information.
To remove your BlackBerry device from the mount,
disconnect the cable, turn the BlackBerry device
sideways, and remove it.
Adjusting the GPS 20SM Volume
Scroll the wheel on the right side of the phone mount
uP
to raise volume or
DowN
to lower it. Scroll
AND
hoLD
uP
or
DowN
to quickly adjust the volume.
1.
2.
3.
4.
Using the Hands-free Wheel
Press the wheel on the right side of the phone mount
IN
to perform hands-free operations:
Status
Quickly Press to… Press and Hold to…
Not
Connected
connect to the
previously paired
BlackBerry device
Connected
use voice dial (if
supported by your
BlackBerry device)
dial the last number
dialed
In a Call
hang up the call
transfer the call to your
BlackBerry device so
you can walk away
from the GPS 20SM
while on a call
Incoming
Call
answer an incoming
call
reject an incoming call
(On most BlackBerry
devices and plans,
rejecting the call sends
it to your voice mail.)
See your BlackBerry device’s documentation for more
details about setting up and using a hands-free device.
