9 - AUX PAGES
168
190-00356-00 Rev B
To change the ILS CDI selection:
1. Select “CDI / Alarms” from the setup 1 page.
2. Turn the
large right
knob to hghlght the
“Auto”/”Manual” ILS CDI field.
3. Turn the
small right
knob to select “Auto” or
“Manual”, as desred. Press
ENT
to accept the
selecton.
NOTE:
Installations with certain autopilots, such
as the KAP 140 and KFC225) do not allow auto-
matic ILS CDI switching.
To set the arrival alarm and alarm distance:
1. Select “CDI / Alarms” from the setup 1 page.
2. Turn the
large right
knob to hghlght the
“On”/”Off” feld (drectly below “Arrval
Alarm”).
3. Turn the
small right
knob to select “On” or
“Off”, as desred. Press
ENT
to accept the
selecton.
4. The flashng cursor moves to the alarm ds-
tance field (to the mmedate rght of “On” or
“Off”). To enter an arrval alarm dstance, use
the
small
and
large
right
knobs to enter
the desred alarm dstance. Press
ENT
when
finshed.
Units / Mag Var
To set the magnetic variation:
1. Select “Unts / Mag Var” from the Setup 1
page.
2. The flashng cursor hghlghts the headng
mode field. Turn the
small right
knob to select
the desred headng mode: Auto or True. Press
ENT
to accept the selecton.
Setup 1
Summary of Contents for GPS 400W
