GPS 500 Pilot’s Guide and Reference
3-3
SECTION 3
DIRECT-TO NAVIGATION
190-00181-60 Rev. G
Selecting a Destination from the Active Flight
Plan
When navigating an active flight plan, any waypoint
contained in the flight plan may be selected as a direct-to
destination from the Select Direct-to Waypoint Page. See
Section 4, for more information on
flight plans.
Selecting a direct-to destination from the
active flight plan:
1) Press the
Direct-to
Key. The Select Direct-to
Waypoint Page appears, with the waypoint
identifier field highlighted.
2) Turn the large
right
knob to highlight the flight
plan (FPL) field (Figure 3-7).
Figure 3-7 Highlighted Flight Plan Field
3) Turn the small
right
knob to display a window
showing all waypoints in the active flight plan
(Figure 3-8).
Figure 3-8 FPL (Flight Plan) Window
4) Continue turning the small
right
knob to
scroll through the list and highlight the desired
waypoint.
5) Press the
ENT
Key to confirm the selected
waypoint, and press the
ENT
Key again to
activate the direct-to function.
Summary of Contents for GPS 500
