9
Quick Start
Changing the name:
1. Using the
ROCKER
key, highlight the Name Field then press the
ENTER
key.
2. Press the
ROCKER
key to the left, this will clear the name fi eld.
3. Press the
ROCKER
key up, scroll through the alpha-numeric list until ‘C’ is selected.
4. Press the
ROCKER
key right to move to the next placeholder.
5. Press the
ROCKER
key down, scroll through the alpha-numeric list until ‘R’ is selected.
You should be starting to get the feel of it. Continue entering letters until you have
spelled the word CREEK.
6. With the letter ‘K’ highlighted, press the
ENTER
key to accept the name.
You can enter any name that you like as long as it does not exceed ten characters, and
does not duplicate a previously saved waypoint. When you have fi nished renaming the
waypoint you will need to store it in the units’ memory.
To store the waypoint:
1. Using the
ROCKER
key, highlight the ‘OK’ Button and press the
ENTER
key.
These are the same steps that you will use to enter names, change numbers and select
options in all of the GPS 72 fi elds.
Here are a couple of tips:
• If you press and hold the
ROCKER
key while scrolling through the alpha-numeric list, it
will move quickly.
• You can scroll through the alpha-numeric list in either direction.
• Don’t press the
ENTER
key until you have fi nished entering the data. Remember, use the
ROCKER
key to move to the next placeholder.
Rocker key Directions
Entering a name
UP
DOWN
LEFT
RIGHT
Entering Data
72 QS Guide RevB.indd 9
10/30/2002, 4:00:11 PM