4
Quick Start
The
GOTO/MOB
key is used to begin or stop navigation to a waypoint. If the
GOTO/MOB
key is pressed and held down, the GPS stores the current location (a
man overboard point) and gives you the opportunity to begin immediate navigation to
that point.
The
PAGE
key will cycle you through the fi ve main display pages in sequence.
The
POWER
key is used to turn the unit on and off. To turn the unit off press
the
POWER
key and hold it. The
POWER
key is also used to display the adjustment
window for the backlight and contrast. To activate the backlight/contrast adjustment
window, press and release the
POWER
key.
The
MENU
key is used to display page option menus. If pressed twice, the Main
Menu will be displayed.
The
QUIT
key will cycle you through the fi ve main display pages in reverse sequence.
The
QUIT
key will end an operation in progress and display the previous page.
The
ENTER/MARK
key is used to activate a data fi eld or confi rm a selection. If the
ENTER/MARK
key is pressed and held, the GPS 72 will store the current location and
display the Mark Waypoint page.
The
ROCKER
key, located in the center of the keypad, is used to control the Up/Down
and Left/Right movement of the cursor on the display pages and during data entry.
MOB
ZOOM
MARK
Interface Keys
The
IN
and
OUT
keys are used on the Map Page and the Plot Page. When pressed,
the
IN
key decreases the map scale or decreased the horizontal plot scale, allowing
you to view a smaller area with greater detail. When pressed, the
OUT
key increases
the map or horizontal plot scale allowing you to view a larger area with less detail.
72 QS Guide RevB.indd 4
10/30/2002, 4:00:08 PM