8
Quick Start
There will be many times that you will need to navigate menus and enter data. An
example is naming a waypoint. The
ROCKER
key is used for this purpose.
Let’s combine a couple of lessons. We will create a new waypoint, enter a waypoint name,
and assign a symbol to the waypoint.
The term ‘Waypoint’ may be new to you. You will fi nd the term Waypoint is used fre-
quently when talking about navigation. A Waypoint is a location, stored in the unit’s memory
that can be used for navigation. Waypoints can be used for direct navigation or to build a
Route.
Creating or “Marking” a waypoint with the GPS 72 is easy. The unit has to be turned on,
and receiving at least three satellites (or simulating navigation) to mark a waypoint.
Marking a waypoint:
1. Press and hold the
ENTER/MARK
key.
When the
ENTER/MARK
key is held down, the
MARK
function of the key is acti-
vated. The GPS 72 will capture it’s current location, and display the Mark Waypoint Page.
By default, the unit will assign a square as the symbol, a number as the name, and the ‘OK’
Button will be highlighted. Pressing the
ENTER
key now would save the waypoint using the
default name and symbol, but let’s change them to something more meaningful.
Changing the symbol:
1. Using the
ROCKER
key, highlight the Symbol Field, then press
ENTER
.
2. Using the
ROCKER
key, highlight the ‘Scenic Area’ symbol, then press
ENTER
.
Symbol Field
Name Field
Mark Waypoint Page
Entering Data
72 QS Guide RevB.indd 8
10/30/2002, 4:00:10 PM
