44
Getting Started
44
Reference
Create Route Options
Use Map —
This displays the Map Page with the Map Pointer active. You can
now point at any location or point on the map, and enter it into the route.
When using the Map to create a route, you can select an existing User
Waypoint/Map Feature, or you can create a ‘New’ Waypoint. New Waypoints
are created if you place the Map Pointer on a location that is not a Map
Feature. A “New Waypoint” will be stored in the User Waypoint List and can
be edited as any other User Waypoint. When placing a “New Waypoint” in a
route, you will have to press
ENTER
to create the waypoint,
ENTER
to save
the waypoint and
ENTER
a fi nal time to insert it into the route.
If you place the Map Pointer on a Map Feature, the GPS 76 will only store that
location in the route using the feature name as a reference. These points are
not stored in the User Waypoint List. If you would like to save a Map Feature
Point as a User Waypoint, highlight the point in the route, press
ENTER
, this
will display an Information Page. With the Information Page displayed, press
MENU
and select ‘Save as Waypoint’.
Add Waypoint —
This will display the Points Menu (see page 38-40 for
information on the Points Menu). As a note, if you highlight the dashed line
in the waypoint fi eld on the Route Page and press
ENTER
it is the same as
making this selection. Use the Points Menu to display an Information Page,
then highlight the ‘OK’ Button and press
ENTER
.
Using a combination of the Map Page and Route Page —
You can create a route
using a combination of the methods described above. Starting with a blank
Route Page, either enter a waypoint manually or press the
MENU
Key and
select ‘Use Map’. You can select ‘Use Map’ at any time while creating a route.
After you have fi nished using the map, press
QUIT
to display the Route Page
where you can continue entering waypoints manually.
Main Menu
Routes
Create Route Options
190-00229-00.indd
07/25/01, 11:22 AM
44
Summary of Contents for GPS 76
Page 1: ...owner s GPS 76 ...
