©Copyright FARMpos Pty Ltd 2010
7.0 To GOTO a point that you have already marked
1.
Press FIND button
2.
WAYPOINTS should be highlighted. Press Enter
3.
Highlight Waypoint you wish to go to and press, ENTER
Waypoint not there?
If the waypoint you wish to go to does not appear on this screen,
then press MENU,
use the ROCKER button to highlight FIND BY NAME
press ENTER.
Then press QUIT. You will now have a complete list of all waypoints stored in the GPS.
4.
Highlight GOTO and press ENTER
5.
The map screen will appear showing your location and the location of the waypoint you
wish to go to.
6.
You can either use the MAP PAGE to locate the desired waypoint or you can press PAGE
until you reach the COMPASS PAGE. This will tell you the direction you have to travel in
and the approximate distance.