43
Current Route Page
Reference
Show Arrival Times
(or
Show Times to Go
)—Switches the Current Route Page
between display of arrival times at each turn and the fi nal destination, or showing time
to go (in hours/minutes or minutes/seconds, as appropriate).
To change the time displayed on the Current Route Page:
1. With the Current Route Page displayed, press
MENU
.
2. Use the
ROCKER KEYPAD
to select ‘Show Arrival Times’ (or ‘Show Times to Go’)
and press
ENTER
.
Add/Remove Via Points
—adds or removes an intermediate location (between
the starting point and fi nal destination) in an active route. If the active route does not
include a via point, the “Add Via Point” option will be available. If the active route
already has a via point, the “Remove Via Point” option will be available. After a via
point is added or removed, the unit will automatically recalculate the route.
To add a via point:
1. On the Current Route page, press
MENU
, highlight ‘Add Via Point” and press
ENTER
.
2. To select a point from the map, select ‘Use Map’ and press
ENTER
. Point to the
desired location on the map and press
ENTER
.
3. To use the Find Menu, select ‘Find’ and press
ENTER
. Use the Find Menu to select
the desired location and press
ENTER
.
To remove a via point:
1. On the Current Route page, press
MENU
, highlight ‘Remove Via Point” and press
ENTER
.
2. A window appears to confi rm the deletion. With ‘Yes’ highlighted, press
ENTER
to
delete the via point.
A via point may be added to the active route
by using the Map or the Find Menu.
‘Show Arrival Times’ displays the arrival
time at each turn.
GPS V OM.indd 43
5/7/2003, 8:53:20 AM
