background image

Menu Page

The GPSCOM 170 menu page provides access to sub-

menu pages that are used to select and customize opera-
tion and navigation setup. The 11 submenus are divided
into categories by function. The waypoint and route man-
agement submenus are discussed in their own respective
sections. We’ll now address the rest of the submenus in
the order they appear on the menu page.

To select a submenu page from the menu page:

1. Highlight the submenu page you want to view and

press 

E

to display the submenu page.

2. To return to the menu page, press 

Q

.

Distance and Sun Calculations

The distance and sun calculation page will give you

the distance and bearing between any two waypoints and
will calculate the sunrise and sunset (in local time) at a
destination waypoint for a particular date.

To perform a distance and sun calculation:

1. Highlight the ‘from’ field and enter the desired way-

point. Press 

E

to move to the next field.

2. Highlight the ‘to’ field and enter the destination way-

point. Press 

E

to calculate the range and bearing

to the destination waypoint.

3. Highlight the ‘date’ field and enter the date for your

destination. Press 

E

to display the sun 

information.

Message Page

The message page displays all current messages in the

GPSCOM 170. There are two types of messages: tempo-
rary alerts (eg., approaching a waypoint) and condition
alerts (eg., battery power is low). All messages are initial-
ly indicated by a flashing on-screen box. After a tempo-
rary alert has been viewed, it is cleared. Condition alerts
are displayed on the message page until the condition is
resolved. See Appendix E for a complete list of messages.

To view the message page:

1. Highlight the ‘MESSAGES’ field and press 

E

.

Menu Page

Reference

56

Menu Page

To select a submenu, use the
UP and DOWN keys to
highlight a menu option and
press ENTER.

Dis/Sun Calculation

The unit will calculate the
sunrise and sunset times of
any stored waypoint or your
present position. To calcu-
late, enter the date and year
and press ENTER.

170 manual pages rev D  9/21/98 9:23 AM  Page 56

Summary of Contents for GPSCOM 170

























































































Reviews: