background image

Quick Start

7

Main Pages/

Features

Main Display Pages

 

There are fi ve Main Display Pages:  the Map Page, Compass Page, Highway Page, Active Route 

Page, and Numbers Page.  Pressing the 

PAGE

 key will display the next Main Page.  Press the 

PAGE

 key 

several times to look at the Main Pages.  The 

QUIT

 key will allow you to cycle through the Main Pages 

in a reverse sequence.

 

Features and Entering Data

Cursor—

 A highlighted area on the screen which can be moved UP/DOWN/LEFT/RIGHT with the 

ROCKER KEYPAD

 to select individual fi elds on the display.  Moving the cursor to a given location 

allows you to begin data entry or scroll through a list. 

Default—

 A system-selected format, built into the operating software of the unit’s memory, that will 

be followed unless the user chooses a different setting.  For example, the default setting for distance 
and speed units is Statute (miles/miles per hour/feet) but can be changed to Metric or Nautical.  Once 
a setting is changed, the new setting is retained until another change is made or the ‘Restore Original 
Settings’ menu option is selected.

Map Page

Compass Page

Highway Page

Active Route Page

Numbers Page

PAGE

PAGE

PAGE

QUIT

QUIT

QUIT

QUIT

PAGE

190-00185-02_0A.indd   7

6/17/2002, 1:17:31 PM

Summary of Contents for GPSMAP 176

















Reviews: