67
To set up Loran TD from the Main Menu:
1. Press the
MENU
key twice to display the Main Menu.
2. Using the
ARROW KEYPAD
, highlight the “Location Format” fi eld on the ‘Units Tab” and press
ENTER
.
3. Highlight ‘Loran TD’, press
ENTER.
4. Highlight the Setup Button located on the right side of the Position Format Field and press
ENTER
.
5. To change the settings of any of the fi ve fi elds, highlight the fi eld, press
ENTER
select/enter the
desired setting, then press
ENTER
.
6. When done, highlight the ‘Save’ button and press
ENTER
.
If the active GRI Chain, secondary stations or offsets have been changed since the waypoint was
created, the waypoint will now reference the active GRI-chain and secondary stations and adjust the
TD coordinates accordingly. Remember that the GPS is not relying on the LORAN signal for navigation
and actually converts the TD coordinate to a useful LAT/LON coordinate before storing the waypoint to
memory or using it for navigation. Because of this, the unit can navigate to a TD coordinate anywhere
in the world.
You must know your GRI chain number, secondary stations to create a LORAN TD position. For
more information please read our LORAN TD Position Format Handbook, available at the GARMIN
web site, at www.garmin.com/support/userManual.html.
Loran TD Setup
Appendix G
LORAN TD Setup page
190-00185-10_0A.indd 67
6/18/2002, 10:01:15 AM
