background image

• Setup Page Display?— allows you to specify the fields displayed in the data window

section of the map page by selecting one of the following display options:

Note: The last two display options make it possible to display both the map page

and sounder page simultaneously as a split screen. The top half of the page will

show a reduced-size map page while the sounder page be displayed in the lower

half of the screen. The sounder page portion of the split screen is only for viewing

and cannot be accessed in this mode. To modify or access the sounder page display,

press 

Q

or

J

until the actual sounder page appears, make any desired

changes, and then return to the split screen map page.

• 2 Fields

• 2 Fields & Compass

• 2 Fields & CDI

• 4 Fields

• 4 Fields & Compass

• 4 Fields & CDI

• 6 Fields

• 6 Fields & Compass

• 6 Fields & CDI

• 8 Fields

• 2 Fields & Sounder

• 4 Fields & Sounder

To select a page display option:

1. Highlight the ‘Setup Page Display?’ option and press 

T

.

2. Select the desired option and press 

T

.

SECTION

4

MAP PAGE

Page Display 

& Data Fields

A

B

A. The map page can be configured to display a

variety of navigation data.

B. Each data field can be set to display one of 13

data options.

43

www.reelschematic.com

www.reelschematic.com

Summary of Contents for GPSMAP 185 Sounder















































































































Reviews: