0
GPSMAP 76Cx Owner’s Manual
B
aSIc
o
peratIon
5. Using the
ROCKER
to select the
Radius
field
and enter a value.
To clear one or all proximity waypoints
from the list:
To remove or review a single entry, press
ENTER
. To remove all waypoints from the list,
press
MENU
>
Remove �ll
.
To turn proximity alarms on or off:
1. Press
MENU
twice to open the Main Menu.
2. Highlight the
Proximity
icon and press
ENTER
to open the Proximity Waypoints page.
3. Highlight the
Proximity �larm Tones
button,
and press
ENTER
to open the Alarm Tones
page. Place a check in the Proximity Alarms
box to activate alarms. As you approach a
proximity waypoint, a tone sounds and a “Near
Proximity Point” message appears. When
you move outside the set radius, a “Leaving
Proximity Point” message is shown. Use this
page to select tones for each alarm.
Man OverBoard (MOB)
Another method for creating a waypoint is the Man
Overboard (MOB) feature. Use this application for
marking a location on water where you cannot stop
quickly and must return to a point where there are no
landmarks for reference.
To create a waypoint using the MOB
feature:
1. Press and hold
FIND/MOB
to mark the MOB
waypoint.
2. Press
ENTER
to open the Map page showing
the path from your current location to the MOB
point. Use the Compass page for additional
guidance to the MOB point.
