GPSMAP
®
6000/7000 Series Owner’s Manual
Charts and 3D Chart Views
Showing and Configuring the Heading Line
The heading line is an extension drawn on the map from the bow of the boat in the direction of
travel. You can configure the appearance of the heading line for the Navigation chart or the Fishing
chart.
Note
: The Fishing chart is available with a preprogrammed BlueChart g2 Vision data card.
1. From the Home screen, select
Charts
.
2. Select
Navigation Chart
or
Fishing Chart
.
3. Select
Menu
>
Chart Setup
>
Chart
Appearance
>
Heading Line
.
4. Complete an action:
Select
Distance
to set the distance to the end of the heading line. For the GPSMAP 6000
series, use the
Rocker
or the
Numeric Keypad
to enter the distance. For the GPSMAP 7000
series, use the on-screen keyboard.
Select
time
to set the amount of time until you reach the end of the heading line. For the
GPSMAP 6000 series, use the
Rocker
or the
Numeric Keypad
to enter the time. For the
GPSMAP 7000 series, use the on-screen keyboard.
5. Select
Done
.
Heading line
Showing and Configuring Spot Depth Soundings
On the Navigation Chart, you can turn on spot soundings and set a dangerous depth.
1. From the Home screen, select
Charts
>
Navigation Chart
>
Menu
>
Chart Setup
>
Chart
Appearance
>
Spot Depths
>
on
.
2. Select
Spot Depths
>
Dangerous
.
3. Enter the dangerous depth:
For the GPSMAP 6000 series, use the
Rocker
or the
Numeric Keypad
.
For the GPSMAP 7000 series, use the on-screen keyboard.
4. Select
Done
.
•
•
•
•
