GPSMAP
®
6000/7000 Series Owner’s Manual
Charts and 3D Chart Views
Fishing Chart
Navigation Chart
The Fishing chart uses detailed bathymetric data on a preprogrammed BlueChart g2 Vision data
card, and is best for offshore deep-sea fishing.
Fishing Chart Appearance
Using Waypoints
See “Waypoints” (
).
Using Tracks
See “Tracks”
).
Showing Other Vessels
See “Configuring the Appearance of Other Vessels” (
Showing Navaids
From the Home screen, select
Charts
>
Fishing Chart
>
Menu
>
Navaids
>
on
.
Showing Data Bars
).
Showing Satellite Imagery on the Navigation Chart
You can overlay high-resolution satellite images on the land, on the sea, or on both portions of the
Navigation chart when using a preprogrammed BlueChart g2 Vision data card.
Note
: When enabled, the high-resolution satellite images are only present at lower zoom levels.
If you cannot see the high-resolution images in your BlueChart g2 Vision region, you can zoom in
further by selecting the
Range
(
+
) key (GPSMAP 6000 series) or the button (GPSMAP 7000
series). You also can set the detail level higher by changing the map zoom detail (
).
1. From the Home screen, select
Navigation Chart
>
Menu
>
Chart Setup
>
Photos
.
2. Complete an action:
Select
Land only
to show standard chart information on the water, with photos overlaying
the land.
Select
Photo Map
to show photos on both the water and the land at a specified opacity. Select
and hold
Up
or
Down
to adjust the photo opacity. The higher you set the percentage, the more
the satellite photos cover both land and water.
•
•
