GPSMAP
®
6000/7000 Series Owner’s Manual
7
Navigation
Creating and Saving a Route
This procedure saves the route and all the waypoints in it.
1. From the Home screen, select
Information
>
User Data
>
Routes
>
New Route
.
2. Select the starting point of the route:
Select
Use Chart
. For the GPSMAP 6000 series, use the
Rocker
to select a location on the
chart. For the GPSMAP 7000 series, touch a location on the chart.
Select
Use Waypoint List
and select a saved waypoint.
Starting
point
3. Select
Add turn
to mark the starting point of the route.
4. Indicate the location where you want to make the next turn:
Select
Use Chart
. For the GPSMAP 6000 series, use the
Rocker
to select a location on the
chart. For the GPSMAP 7000 series, touch a location on the chart.
Select
Use Waypoint List
and select a saved waypoint.
5. Select
Add turn
.
The chartplotter marks the position of the turn with a waypoint.
6. If you want to add additional turns, repeat steps 4 and 5.
7. Select a destination:
Select
Use Chart
. For the GPSMAP 6000 series, use the
Rocker
to select a location on the
chart. For the GPSMAP 7000 series, touch a location on the chart.
Select
Use Waypoint List
and select a saved waypoint.
•
•
•
•
•
•
